You are here: Home > Sundries > Non Skid Recycled Aggregates

Recycled Non-Skid Aggregates allow the installer to create a non skid texture on virtually any concrete or wood substrate. Our line of aggregates are chosen for durability, functionality, and assist with Green Building LEED objectives. These aggregates are used with our Eco-Tuff Clear Coatings and Pigmented Coating products.

30 Mesh Fine: 100% Recycled Clear Glass Fine Aggregate provides enhanced slip resistance while maintaining your substrate colors. This environmentally favorable aggregate is a superior silica sand substitute that consists of 100% recycled glass. The refined glass fines are as hard as quartz to provide longer durability against premature degradation as typical with sand. 30 Mesh is equivalent to the texture of 36-60 grit sandpaper.

80 Mesh Powder: 100% Recycled Clear Glass Powder Aggregate provides a lower profile texture and is virtually undetectable while providing an excellent non skid finish. 80 Mesh is equivalent to the texture of 80-120 grit sandpaper. It is recommended to apply a minimum of one additional topcoat to fully encase the aggregate in the coating material.

Mix 1lb aggregate per 1 gallon of Eco-Tuff Coating, then apply the coating as usual or simply broadcast the aggregate while the first coat is wet. Apply 1 or more topcoats as desired. Sweep any loose aggregate prior to topcoats.

Sort By:
1
100% Recycled Clear Non Skid Additive 100% Recycled Clear Glass Aggregate, 30 Mesh Usually Ships in 1 to 2 Business Days
Our Price: 3.50

(1)
100% Recycled Clear Non Skid Additive 100% Recycled Clear Glass Powder, 80 Mesh Usually Ships in 1 to 2 Business Days
Our Price: 3.00
   
 
1