A wide selection of quality aisle marking and pipe banding tapes. Our Aisle Marking PVC Tapes are made from a durable vinyl film with a permanent acrylic adhesive system. Vinyl offers a matte smooth conformable tape that is great for marking hazards on floors, walls, equipment and pipe banding. Available in 1", 2", 3", 4" 6" widths x 108' or 180' rolls. Available Tape Colors: yellow, black, orange, gray, brown, magenta, white, blue, red, green.

Case Qty: 12 Rolls
Roll Length: 36 Yards (108')
Case Weight: 20 lbs
Roll Length: 60 Yards (180')
Case Weight: 30 lbs

PRODUCT INFORMATION GUIDE
Application(s): a good choice for most industrial applications. Our general purpose PVC tape products are a great choice for floor aisle marking and color-coding pipe banding applications. The coloring is throughout the vinyl so it can not scratch or scuff during wear. The 6 MIL PVC film is formulated with a cross linked rubber adhesive providing good adhesive tack and flow, making it Adhesive: Crosslinked Rubber Adhesive

Carrier: Vinyl (6 MIL)
Total Thickness: 6.8 MIL
Specifications: Meets Federal Specification: PPP-T-66E
Liner: No Liner - Tape Is Self Wound
Shelf Life: One year from date of purchase when stored at 700F, 50% relative humidity.

Property: Test Method: Measurement:
PVC Film
Thickness PSTC-33 6 mils
Tensile Strength ASTM-D638 > 15 lb / inch
Elongation ASTM-D638 > 150%
Rubber Adhesive
Dry Coat Weight PSTC-33 35 g/m2 (0.066 oz/yd2)
180 Peel Adhesion PSTC-1 > 1 lb / inch
Operational Temp. (-10 to 600C) -14 to 1400F
Min Application Temp. 100C (500F)

This data is based on typical results achieved. It is the sole responsibility of the buyer or user to ensure that the product is suitable
for any proposed end use or application and to esnure proper cleaning of the substrate to which it will be applied. This data in no
way constitutes a specification, nor should it be seen as a recommendation for use. We accept no liability for any loss, damage
or injury resulting from the use of these products or data. November 2003.