TimberSoy^tm Natural Wood Stain is a professional grade non toxic, bio-based natural wood stain made from soybean oils that preserves wood surfaces and creates a beautiful, rich natural look. Unlike conventional wood stain products, soy ester actually penetrates into growth rings and continues to spread and seal throughout the wood all year to replicate the woods' natural sap. This achieves enhanced wood protection and beautiful natural colorization. Enjoy enhanced spread rates that are more than double compared to competitive products, making it very economical at only pennies per square foot.

• Bio-Based Soy Technology
• Non-Toxic, Non Flammable
• Very Low VOC
• Virtually Odorless
• Penetrating & Protective Stain
• Extends Wood Life
• Beautiful Semi-Transparent Finishes
• Water Resistant
• Stain Resistant
• Safe, Easy, High Spread Application
• "Goof Proof" Technology

• Application Data:
  
• 
  Thoroughly clean and remove all paints, stains, finishes, waxes, oils, debris and contaminants.  Apply material to a clean, dry surface using a brush, pad, 3/8” nap roller or low pressure spray in a thin even coat. Wipe all excess stain from the surface. When satisfied with the decorative look, allow the area to cure for 4-6 hours. When cured, wipe the stain again, then apply the ECO ProCote^TM sealer (satin or gloss) to seal and finalize installation with a lock-in protective sealant for long term protection. Sand and reseal as desired to obtain the finish desired. Reseal every 2 to 3 years or as needed to prolong the life and beauty of your wood finish.
• 
  Technical Data:
  
  Read all instructions carefully and refer to product Material Safety Data Sheet.
  Color: Tint Base
  VOC: <25 g/l
  Odor: Low, Soy Ester
  Shelf Life: 1 year
  Coverage: 400-600 sq.ft./gal approximate
  Temperature: 40°F min to 120°F max
  Relative Humidity: 85% max, below 80% for best results.
  Dry to Touch: 1 hour approximate
  To Top Coat, if desired: 1 to 2 hours
  To Seal: 4 to 6 hours
  To Full Cure: 24 hours to 5 days
  
  Soy Stain Life Expectancy:
  As with any coating, there is no way of predicting the actual life span of the coating due to substrate variations, installation, application, environment and use. However, since ECO ProCote^TM is not a topical coating, it will not flake or peel away. The stain will last as long as the substrate integrity is undamaged. If wear to the substrate occurs, it will inevitably begin to wear the stain. Vertical, non traffic applications will enjoy significant longer life spans. To ensure maximum life span expectancy, we recommend applying our ECO ProCote^TM sealers every 2-3 or as needed.