Product Support Documentation:
OSHA Compliant 1910.24, 1910.26
Aggressive Peel & Stick Acrylic Adhesive
Case Qty: 6 Rolls
Roll Length: 60'
Case Weight: 12 lbs
PRODUCT INFORMATION GUIDE
Application(s): Anti-slip grit tape products are a fast, easy way to reduce slip and fall accidents in the workplace. Tape will adhere to any clean dry surface including metal, wood and concrete. Surface is constructed of a aluminum oxide grit compound securely bonded to a vinyl substrate with an aggressive acrylic adhesive. Tape is available chemical and water resistance, and wear resistance. This product has been double sealed with a 2-part epoxy resin that ensure durability, coupled with an acrylic in black, clear, yellow, gray, yellow/black striped, red/white striped, blue, red, green. Our Premium grade anti-slip grit tape offers our highest standards of longevity, adhesive system that does not require edge sealing to resist attack from water and chemicals. Surface sealer may be recommended for some difficult applications. Premium anti-slip product offers excellent water & solvent resistance and an embedded grit technology that will ensure extended wear, even in high traffic areas. Tape is intended for both indoor and outdoor applications, and is water-proof under normal applications. Not intended for submerged applications.
Adhesive: Acrylic Solvent Adhesive
Carrier: Vinyl (4 mil) with Aluminum Oxide Grit Material (60Grit)
Total Thickness: 0.025" ( 0.635mm )
Liner: Paper Liner With 1" Square Grit Pattern (6.8 mil)
Tape Application: Surface sealer is recommended for porous surfaces such as concrete and wood. Surface must be clean and free from water, dust, dirt, oil, wax, silicone.
Outdoor Durability: 3 - 5 years in horizontal exposure, depending on total annual UV of region.
Certification: National Flooring Safety Institute NOSY 101-A Certification As "High-Traction"
For Optimum Surface Preparation:
Concrete: Clean with Trisodium Phospate (TSP) rinse thoroughly and allow to dry. Apply contact adhesive (ie DAP Weldwood) and allow to dry, then apply tape.
Metal: Clean surface with isopropyl alcohol (not Rubbing Alcohol) allow to dry, then adhesive tape to surface.
Wood: Clean with Trisodium Phospate (TSP) allow to dry then seal surface with contact adhesive (ie: DAP Weldwood). Allow adhesive to dry then apply tape.
Cleaning Tape: Clean tape surface with a mild soap and light broom, rinse with fresh water.
Shelf Life: One year from date of purchase when stored at 700F, 50% relative humidity.
Property: Test Method: Measurement:
Thickness: PSTC-33 0.15mm (4 mils)
Tensile Strength: MD ASTM-D638 4.2 Kg/15mm (15.4 lbs/inch)
Tensile Strength CD: ASTM-D638 3.1 Kg/15mm (11.4 lbs/inch)
Elongation: ASTM-D638 200% +/- 25%
Dry Coat Weight: PSTC-33 44.4 g/m2