FREE SHIPPING ON ORDERS OVER $150
Customer Service: (602) 305 - 9397
Toll-Free: (877) 366 - 7547
Mon-Fri: 8:00am – 4:00pm (Arizona MST)
Our die cut non skid square grit treads are made from the same materials as the Contractor Grade Non Skid products, but pre-cut to give a finished look on your floor, steps, or equipment. All die cut treads have rounded corners reduce edge "flagging" and corners from lifting. An acrylic adhesive system forms a strong bond to most any clean, dry surface.
These tapes work well in both indoor and outdoor applications. Water resistant for outdoor usage. They are packaged 50/package. Excellent use for; stairs, steps, ramps, equipment, floors, and more...
Case Qty: 18 Packages of 50Size: 5 1/2" x 5 1/2"Grit: 46-GritCase Weight: 36 lbs
PRODUCT INFORMATION GUIDE Application(s): Not intended for submerged applications. Anti-slip grit tape products are a fast, easy way to reduce slip and fall accidents in the workplace. Tape will adhere to any clean dry surface including metal, wood and concrete. Surface is constructed of a aluminum oxide grit compound securely bonded to a vinyl substrate with an aggressive acrylic adhesive. Tape is available in black only. Intended for both indoor and outdoor applications, and is waterproof.
Adhesive: Acrylic Solvent Adhesive Carrier: Vinyl (6 mil) with Aluminum Oxide Grit Material (46 Grit) Total Thickness: 0.030" ( 0.762mm ) Grit Size: 46-Grit Liner: Brown Kraft Paper Liner 0.007" (0.18mm) Tape Application: Surface must be clean and free from dust, dirt, oil, wax, silicone. Minimum application temperature 10C (50F) Cleaning: Clean tape surface with a mild soap and light broom, rinse with fresh water. Shelf Life: One year from date of purchase when stored at 70F, 50% relative humidity.
Property: Test Method: Measurement: PVC Film Thickness: PSTC-33 0.15mm (6 mils) Tensile Strength: MD ASTM-D638 4.2 Kg/15mm (15.4 lbs/inch)Tensile Strength CD: ASTM-D638 3.1 Kg/15mm (11.4 lbs/inch) Elongation: ASTM-D638 200% +/- 25%Acrylic Adhesive Dry Coat Weight: PSTC-33 44.4 g/m2 Coating Thickness PSTC-33 0.06mm (0.0023")Residual Solvent > 0.5%Tack PSTC-6 20 cm (8 inch)Shear Resistance PSTC-7 24 hours (1" x 1" @ 1 Kg)180 Peel Adhesion PSTC-1 2.5 Kg/25mm (5 lb/inch)Operational Temp. (-10C to 60C) -14F to 140FMin Application Temp. 10C (50F)
Back to top