You are here: Home > Stains > Natural Wood Stain > Wood Sealers
Sort By:
1
Polyurethane Clear Coat Eco-Tuff Polyurethane Clear Coating, Matte, 1 Gal
MSRP: $69.98
Sale Price: $59.99
You save $9.99!

(1)
Polyurethane Clear Coat Eco-Tuff Polyurethane Clear Coating, Satin, 1 Gal
MSRP: $69.98
Sale Price: $59.99
You save $9.99!

(1)
Polyurethane Clear Coat Eco-Tuff Polyurethane Clear Coating, Gloss, 1 Gal
MSRP: $69.98
Sale Price: $59.99
You save $9.99!

(1)
   
 
1

EcoProcote Nontoxic Wood Sealer

At Eco Safety Products, we carry the full range of sustainable EcoProcote nontoxic wood sealers. We offer the best outdoor wood sealers (as well as indoor wood sealers!) from our Acri-Soy, EcoPoly and Eco-Tuff lines. Whether you are working with stained, unstained or highly absorbent wood, our nontoxic wood sealers provide a durable, beautiful finish. Adding a waterproof sealant is one of the best ways to protect your wood surfaces and is a necessary step before adding any varnish, lacquer or water-based coatings to ensure a smooth application. Wood sealers also prevent bleeding from stains for a consistently beautiful finish. Choose from matte, gloss or satin finishes in a clear coat for wood. We utilize bio-based technology to create wood sealers from sustainable ingredients that produce low or zero VOC. What this means is that when you buy a no-VOC clear wood sealer from us, you also get peace of mind knowing you are using a product that is eco-friendly and free of harsh odors.

Nontoxic Wood Sealer Key Features:

  • Durable
  • High-performing
  • Sustainable, environmentally friendly
  • Odorless, zero VOC content
  • Never flakes or peels
  • Easy cleanup, just soap and water needed
  • Fast dry time
  • Solvent-free
  • Water repellant
  • UV-resistant
  • Breathable chemistry

Acri-Soy Wood Sealer Features:

  • Non-film-forming bond and seal
  • Does not require stripping when recoating
  • Allows moisture vapors to escape while blocking moisture absorption
  • Uses EFF-Bloc technology to enhance efflorescence and water resistance
  • Bio-based emulsion
  • Made with renewably sourced ingredients
  • Petro-solvent-free
  • Glycol-ether-free
  • Integral bonding
  • 30–60 minute dry time
Acri-Soy Sealer
Technical Data
V.O.C. Content <10 G/L
Bio-Based Content 20%
Flash Point Non Flammable
Freeze Point 32 degrees F / 0 degrees C
Hazardous Components None
Protection A Safety Glasses

EcoPoly Wood Sealer Features:

  • Formulated with advanced plant-based urethane technology
  • Polyurethane sealer with non-yellowing crystal-clear finish
  • Hard, solvent-free resins for scratch and chemical resistance
  • Bio-urethane for high-flex strength to prevent cracking
  • For interior and exterior projects
  • Matte, satin or gloss finish
  • Best applied with a microfiber mop
  • Easy long-term maintenance; restore original luster fast with a high-speed burnish or a fresh coat
  • No accidental combustion
  • No residual toxic off-gassing
  • Chemical-resistant
  • Scratch-resistant
  • 20–30 minute dry time
EcoPoly Sealer
Technical Data
Chemical Type Bio-Based Polyurethane and Bio Emulsions Resins
Flammability Non-Flammable
Typical Coverage 500 - 2000 Sq ft per Gallon (dependent on surface texture)
Typical Dry Time 20-30 Minutes
Installation Temperature 45-95 degrees F < 80% Humidity
Drying Methods By Evaporation, Forced Heat or Forced Air Will Accelerating Drying
Viscosity 72 KU +/- 5
Bio-Based Content <15%
VOC Content 0 Grams/Liter

EcoTuff Wood Sealer Features:

  • Best for a natural matte finish
  • Self-sealing hybrid bio-polyurethane
  • Abrasion-, moisture- UV- and weather-resistant
  • Replacement for hazardous epoxies, polyurethanes, lacquers and varnishes
  • Crack- and peel-resistant
  • Non-yellowing crystal-clear finish
  • Matte, satin or gloss finishes available
  • Interior or exterior use
  • 30–60 minute dry time
EcoTuff Sealer
Technical Data
Chemical Type Bio-Based Polyurethane and Bio Emulsion Resins
Flammability Non-Flammable
Typical Coverage 300-400 Sq Ft. per Gallon (dependent on surface texture, porosity, and volume of material applied)
Typical Dry Time 30-60 Minutes
Installation Temperature 45-95 degrees F <80% Humidity
Drying Methods By Evaporation, Forced Heat or Forced Air Will Accelerate Drying
Viscosity 78 KU +/-3
Bio-Based Content <15%
VOC Content 0 Grams/Liter