FREE SHIPPING ON ORDERS OVER $150
Customer Service: (602) 305 - 9397
Toll-Free: (877) 366 - 7547
Mon-Fri: 8:00am – 4:00pm (Arizona MST)
COVID-19 STATUS UPDATES
Our die cut non skid grit treads are made from the same materials as the Premium Non Skid products, but pre-cut to give a finished look on your floor, steps, or equipment. All die cut treads have rounded corners reduce edge "flagging" and corners from lifting. An acrylic adhesive system forms a strong bond to most any clean, dry surface.
These tapes work well in both indoor and outdoor applications. Water resistant for outdoor usage. They are packaged 50/package. Excellent use for; stairs, steps, ramps, equipment, floors, and more...
Case Qty: 5 Packages of 50Size: 6" x 24"Grit: 60-GritCase Weight: 35 lbs
PRODUCT INFORMATION GUIDE Application(s): Anti-slip grit tape products are a fast, easy way to reduce slip and fall accidents in the workplace. Tape will adhere to any clean dry surface including metal, wood and concrete. Surface is constructed of a aluminum oxide grit compound securely bonded to a vinyl substrate with an aggressive acrylic adhesive. Tape is chemical, water and wear resistant. This product has been double sealed with a 2-part epoxy resin that ensure durability, coupled with an acrylic in black. Our Premium grade anti-slip grit tape offers our highest standards of longevity, adhesive system that does not require edge sealing to resist attack from water and chemicals. Surface sealer may be recommended for some difficult applications. Premium anti-slip product offers excellent water & solvent resistance and an embedded grit technology that will ensure extended wear, even in high traffic areas. Tape is intended for both indoor and outdoor applications, and is waterproof under normal applications. Not intended for submerged applications.
Adhesive: Acrylic Solvent Adhesive Carrier: Vinyl (4 mil) with Aluminum Oxide Grit Material (60 Grit) Total Thickness: 0.025" ( 0.635mm )
Tape Application: Surface sealer is recommended for porous surfaces such as concrete and wood. Surface must be clean and free from water, dust, dirt, oil, wax, silicone. Outdoor Durability: 3 - 5 years in horizontal exposure, depending on total annual UV of region.
For Optimum Surface Preparation: Concrete: Clean with Trisodium Phosphate (TSP) rinse thoroughly and allow to dry. Apply contact adhesive (ie DAP Weldwood) and allow to dry, then apply tape. Metal: Clean surface with isopropyl alcohol (not Rubbing Alcohol) allow to dry, then adhesive tape to surface. Wood: Clean with Trisodium Phosphate (TSP) allow to dry then seal surface with contact adhesive (ie: DAP Weldwood). Allow adhesive to dry then apply tape. Cleaning Tape: Clean tape surface with a mild soap and light broom, rinse with fresh water. Shelf Life: One year from date of purchase when stored at 70F, 50% relative humidity.
Property: Test Method: Measurement: PVC Film Thickness: PSTC-33 0.15mm (4 mils) Tensile Strength: MD ASTM-D638 4.2 Kg/15mm (15.4 lbs/inch)Tensile Strength CD: ASTM-D638 3.1 Kg/15mm (11.4 lbs/inch) Elongation: ASTM-D638 200% +/- 25%Acrylic Adhesive Dry Coat Weight: PSTC-33 44.4 g/m2
Back to top